Williams AV WF SY5 PRO-4 D WAP Wi-Fi Assistive Listening, WAP/Router, 4 Receivers with Dante
Wi-Fi assistive listening system with Dante input, WAP / Router and 4 Wi-Fi receivers.
system includes
(1) WF T5 D transmitter
(4) WF R1N receivers
(1) WF WR10 Access Point
(4) CCS 062 BK receiver skins
(1) CHG 404 WF 4-slot charger
(4) EAR 022 earphones
(2) NKL 001 S neckloops
(1) RPK 005 rack panel kit
(1) IDP 008 ADA wall plaque
chg 404
| Dimensions: | 6”L x 5”W x 3”H (15.6 cm x 12.7 cm x 7.85 cm |
| Weight: | 0.70 lbs (0.3 kg) |
| Color: | Black and clear plastic |
| Power Input: | AC 100-220V 50/60Hz 0.5A (max) |
| Power Output: | DC 5.0V 1.1A per bay (22W max) |
| Unit Capacity: | 4 Units |
| Indicators: | Individual Charging Indicators: Blue LEDs light up dividing clear panels |
| Compatible Units: | CHG 404 WF: WF R1 CHG 404 DW: DLT 400, DLR 400 RCH (Appropriate USB cables can be used with any CHG 404. See Note.) |
| Warranty: | 1 year (90 day warranty on cables and power supply) |
| Approvals: | WEEE, RoHS, CE, FCC, IC |
| Notes: | Accepts USB type A plugs, with a USB-C or with a micro-B plug that can connect to the device to be charged. |
ear 022
|
Style |
Around-ear speaker |
|
Plug |
3.5mm mono |
|
Cord |
39" |
|
Driver Size |
23 mm |
|
Nominal Impedance |
32Ω |
|
Freq. Response |
20 - 20kHz |
|
Weight |
15g |
|
Max Power Input |
30 mW |
|
Sensitivity |
118 dB @ 1kHz |
idp 008
10-3/8" (L) x 6-¼" (W) x 1/8" (H)
wf r1
| Dimensions | 1.89” W x 0.5” D x 4.46”H (48 cm x 12.7 cm x 113.3 cm) |
| Display | 2.0” (5 cm) full color OLED Touchscreen |
| Receiver Jack | 3.5mm standard mono jack |
| Battery Life | 6 hours |
| Charge Time | About an hour |
| Approvals | FCC, RoHS3, WEEE, Industry Canada, CE, RCM, Telec |
| Warranty | 2-year parts and labor |
wf t5 d
Note: The WaveCAST connects to the installation location's Wi-Fi Network. It does not provide a network on its own. The Wi-Fi network will need to be installed and established before the WaveCAST can be used.
| Dimensions | 8.45" W x 8.25" D x 1.72"H (21.5 cm x 21 cm x 4.4 cm) | ||
| Weight: | Transmitter: 3.0 lbs (1.36 kg) | ||
| Color | Black/Silver with silver legends on the front, white legends on the back | ||
| Rack Mount | Standard 19" Rack, one EIA rack space high, 1/2 space wide 1–2 units can be mounted in a single rack space with optional RPK 005 (single) or RPK 006 (double) Rack Mount Kits | ||
| Power Supply | Desktop Style Transformer (TFP 062); Input: 100-240 VAC, 50/60 Hz. IEC Line Cord; Output: 24 VDC, 750 mA, 18W. 2.5mm ID center positive barrel connector | ||
| Power ON Indicator | Push On/Push Off latching power button, backlit green indicates power ON, backlight off indicates power OFF, fading from bright to dark indicates Sleep Mode. | ||
| Temperature Range | Operating: +32° F to +122° F (0° C to 50° C); Storage: -4° F to +158° F (-20° C to 70° C) | ||
| Audio Processor Functions | DSP based; Compression: 1:1, 1.5:1 or 2:1; High-pass and Low-pass Filter Frequency control | ||
| Frequency Response | 31 – 16000 Hz, ±3 dB (Music Audio Preset) | ||
| Signal-to-Noise Ratio | Greater than or equal to 74 dB Transmitted RF | ||
| Total Harmonic Distortion | Less than 0.25% @ 1 kHz (RF output) | ||
| Common Mode Rejection | Greater than 57 dB @ 1 kHz, Mic or Line | ||
| User Interface | Front panel buttons or hosted web interface | ||
| Audio Inputs | (1x) Combination 3-pin XLR, 1/4" (TRS) jack for Mic or Line Level Analog Audio, Balanced or Unbalanced Line Level, or balanced or unbalanced microphone with Selectable Phantom Power | ||
| Audio Input Gain Adjust | In menu, adjustable to 0 to -50 dB, in 1dB steps | ||
| Phantom Power | 14.4 VDC applied through 2.2 kΩ resistors to analog combo jack: Pin 2 and Pin 3 on XLR jack, or tip and ring on 1/4” TRS jack | ||
| Audio Level Indicators | 10-LED?array that reads -18 to +9 dB at 3 dB intervals. 7 Green, 2 Amber, and 1 red LED. Green LEDs indicate normal operating audio level peaks, Amber LEDS indicate close to overload peaks, Red LED indicates overload peaks | ||
| Headphone Output | 1/4" TRS stereo jack, mono signal, 15.7 mW, maximum in 33 Ω (level adjustable in menu 0 to -40 dB in 2 dB steps) | ||
| Line Output | RCA jack (black), -10 dBV (.32 VRMS); Output impedance 100 Ω | ||
| Input Levels (Bal or Unbal) (at Audio Input Gain = 0dB) |
|
||
| Microphone |
|
||
| Line |
|
||
| Ethernet | RJ-45 on back of unit supports CAT 5e cable lengths up to 328 feet (100 meters); 10/100 Base-T IEEE 802.3 compliant, unique MAC address | ||
| Operating Systems | Apple iOS 9.1 or newer; Android 6.0 or newer; Blackberry and windows not supported | ||
| Approvals | FCC, RoHS3, WEEE, Industry Canada, CE, PSE, RCM, CB Scheme | ||
| Warranty | 2-year parts and labor |
Specifications Subject to Change
Some units may be shipped with an alternative power supply.
wf wr10
| Dimensions | 9.3” x 7” x 1.65” (236cm x 178cm x 42cm) |
| Weight | 1.8 lbs. (0.82 kg) |
| Standards Compliance | 2.4GHz: IEEE802.11n, IEEE802.11g, IEEE 802.11b; 5.xGHz: IEEE 802.11n, IEEE 802.11a; 802.11ac IEEE802.3, IEEE802.3u, IEEE802.3ab |
| Interface | One 10/100/1000M WAN Port (Auto MDI/MDIX); Four 10/100/1000M LAN Ports (Auto MDI/MDIX); One USB 3.0 Port |
| Antenna | Four 5dBi Detachable Omni-Directional Antennas |
| Power | Input: 12VDC @ 3A |
| Max Power Consumption | 35W |
| Wireless Speed | 2.4GHz: 1000Mbps; 5GHz: 2167Mbps |
| Frequency | Concurrent 2.4GHz and 5GHz |
| Wireless Security | WPA/WPA2-PSK, WPA/WPA2, AES |
| Approvals | CE, FCC, RoHS, IC, RCM |
| Warranty | Three (3) year, parts and labor |