Skip Navigation Website Accessibility

Middle Atlantic Rack - WRK-SA Series - 24U, 32' Deep, Rear Door - Black

A rack series with a wider footprint, the WRK-SA series is designed for mounting equipment with thicker cable bundles than would fit easily in a basic rack, or to increase cooling airflow. Stand-alone installations version features fixed solid sides and seismic certification.
  • Fully welded construction for strength
  • Fixed solid sides for security and to control airflow
  • 24-¼” overall width provides space for side cabling or cooling airflow
  • Convenient lacing points and slotted rail brackets for cable management
  • Standard front and rear adjustable 10-32 threaded rackrail with numbered spaces
  • Extra-wide rackrail features cable pass-throughs to facilitate front-to-rear cabling
  • Includes standard configurable rear door

General Info
  • Finish: Black Powder Coat
  • UL Standards Tested: UL1678
Listing Agencies/Third Party Certifications
  • ASCE: 7-10
  • RoHS: Yes
  • Greenguard: Yes
  • UL Listing No: E173107
  • Usable Depth: 30.75
  • Usable Height: 42
  • Panel Width: 19
  • Capacity Weight (US): 10000
  • Depth (US): 32.625
  • Height (US): 48.125
  • Width (US): 24.25
  • Rack Units: 24
Technical Information
  • Rackrail Type: 10-32
  • Seismic Load Capacity: 900
  • Static Load Capacity: 10000
  • UL Load Capacity: 2500
  • Material: Steel
  • Mounting: Horizontal
  • Seismic Rating: Yes
Stand-alone equipment rack shall be Middle Atlantic Products model # WRK-24SA-32. Overall dimensions of rack shall be 48-1/8”H x 24-1/4”W x 32-5/8”D. Useable height shall be 24 rackspaces, useable depth shall be 30-3/4”. Fully welded construction shall provide a static load capacity of 10,000 lbs. and a UL Listed 2,500 lb. weight capacity. Top and bottom shall be 14-gauge steel, horizontal braces shall be 16-gauge steel welded to integral structural side panels of 16-gauge steel giving an 1/8” thick structure, all structural elements shall be finished in a durable black powder coat. Rack shall include a locking, latching rear door. Rack shall come equipped with two pairs of 11-gauge steel rackrail with tapped 10-32 mounting holes in universal EIA spacing. Rackrail shall be finished in black e-coat with numbered rackspaces. Top and bottom of rack shall have a vertical slotted vent pattern. The WRK shall have a solid locking rear door. Rack shall have removable split rear knockout panels with 1/2”, 3/4”, 1”, and 1-1/2” electrical knockouts installed in base, and removable split rear knockout panels with electrical knockouts and BNC knockouts for UHF/VHF antennae installed in top. Fully welded sides shall feature vertical vent pattern at top and bottom. Grounding and bonding stud shall be 1/4-20 threaded, installed in base of enclosure. WRK-SA Series enclosures shall satisfy the 2007 & 2010 CBC; 2006, 2009 & 2012 IBC; ASCE 7-05 (2005 Edition) & ASCE 7-10 (2010 Edition) and the 2006 & 2009 editions of NFPA 5000 for use in areas of high seismicity, Seismic Use Group III, Zone 4 or Seismic Design Category (SDC) “D” with lateral force requirements for protecting 900 lbs. of essential equipment in locations with the highest level of seismicity and top floor or rooftop installations with an Importance factor (Ip) of 1.5 when used with WRK-Z4 seismic floor anchor bracket. WRK shall be UL Listed in the US and Canada. WRK shall be GREENGUARD Indoor Air Quality Certified for Children and Schools. WRK shall be RoHS EU Directive 2002/95/EC compliant. WRK shall be manufactured by an ISO 9001 and ISO 14001 registered company. Rack shall be warrantied to be free from defects in material or workmanship under normal use and conditions for the lifetime of the product.