Ashly WR-1 Dual Level Wall Remote for 24.24M

Ashly WR-1 Dual Volume Control Decora Wall Remote

Connect your system from any location with our remote controls.  These devices fit in standard wall boxes and use low gauge wire for hook-up.  The WR-1 is a dual potentiometer remote level control for Ashly products that have Remote DC level control pins.  The WR-1 uses DC voltage provided by the host unit to attenuate one channel of that unit.

Key to the success of your project is the ability to give the Pro AV System clients the ability to intuitively control the sound system within defined parameters.

Sophisticated, network audio products are still operated by inexperienced personnel. Ashly offers both network, serial, and passive remote controls that allow clients to easily select presets, route sources to specific rooms & zones and turn the volume up or down.

The WR-1 is an assignable, dual potentiometer remote volume control for the 24.24M. Each volume control is connected to a euroblock jack terminal on the WR-1 circuit board, which in turn must be wired to the 24.24M back panel euroblock connector labeled "0 - 5 Volt Remote Level Control".

By connecting a volume control to a specific pin (1-8), that pin can be selected in software under to control the level of any combination of inputs or outputs. It is possible to simultaneously select the same input or output channel to multiple remote level control pins.