Alesis Multimix 12R - 12-Channel 3RU Mixer
|
|
The Alesis MultiMix 12R Rack Mountable 10-Channel, 12-Input Mixer is a high quality, rack mountable audio mixer designed for recording and sound reinforcement applications. The mixer features 8 mono inputs and 2 stereo paired (L/R) inputs, for a total of 12 line level inputs via balanced 1/4" TRS Phone connectors. Channels 1 through 8 feature XLR Balanced microphone inputs with phantom power (global switch). Each channel features a 2 band EQ (High / Low), 2 AUX sends and PAN (Balance control on stereo inputs). Additional I/O include L/R AUX returns, L/R Tape In and Tape Out jacks via RCA connectors, and L/R Main and Monitor outputs via balanced 1/4" TRS connectors. Channels 1 through 8 feature Inserts for direct routing of channels through out-board effects or signal processors using insert cables. The Insert points are also suitable for use as monitor sends (using tip-sleeve 1/4" cable only). All this enclosed in a convenient rack mountable enclosure provide sonic quality, durability while remaining portable.
The mixer is enclosed in a 3-unit rack mountable enclosure making it a suitable road-worthy mixer for recording or sound reinforcement.
Channels 1 through 8 feature mono balanced 1/4" TRS inputs. The 2 remaining channels feature stereo paired (L/R) 1/4" TRS inputs, suitable for keyboards play-back devices and other stereo signals.
3-pin XLR female microphone inputs are featured on channels 1 through 8. All mic-preamps provide phantom power (global switched) for condenser microphones.
Channels 1 through 8 feature insert points for routing channels to effects or signal processors.
Features:
- Mono and Stereo Inputs
- XLR and 1/4" Connectors
- 2-Band EQ
- Rack Mountable Housing
Specifications:
| Total # Of Inputs | 12 - Total Line Inputs |
| Mic/Line Inputs | 12 - Balanced 1/4" TRS Phone Inputs 8 - Balanced XLR Mic Inputs |
| Stereo Line Inputs | 2 - Stereo Paired 1/4" Phone (inputs 9,10 & 11,12) |
| In-Line Inputs/Returns | No |
| AUX Sends | 2 - 1/4" TRS Phone (L/R) |
| AUX Returns | 2 - 1/4" TRS Phone (L/R) |
| Inserts | 8 - 1/4" Phone Inserts on Channels 1 through 8 |
| BUS (Group) Outputs | Stereo Buss Only |
| 2 Trk Master I/O | Main Output: Balanced 1/4" Phone (L/R) |
| ALT I/O | Tape In: Unbalanced RCA female (L/R) Main Out: Unbalanced RCA female (L/R) |
| Monitor Outputs | Monitor Out: Balanced 1/4" Phone (L/R) |
| EQ Section | High: 12kHz +/- 15dB Low: 80Hz +/- 15dB |
| Solo/Mute | No |
| Channel Level Control | Fader Control |
| Trim/Gain Control | Sealed Potentiometers Max Gain: +76 dB, MIC IN to MAIN OUT, balanced +80dB, MIC IN to MONITOR OUT, balanced or unbalanced |
| Phantom Power | +48 Volt (global switch) |
| Metering | 10 segment stereo peak indicators Phantom and Power indicator LEDs |
| Frequency Response | 10Hz - 65kHz +0/-1 dB (any input to any output at nominal operating levels) -3dB Point: 125kHz |
| Dynamic | not specified by manufacturer |
| Signal-to-Noise Ratio | MIC IN to INSERT OUT: -128.5 dBu Equivalent Input Noise at maximum gain Residual output noise (MASTER fader at nominal, channel faders at minimum): 12 inputs, faders and trims at unity gain, inputs terminated 150 ohms: |
| Total Harmonic Distortion (THD) | measured with a 0 dBu signal coming into a MIC IN jack with trim set for a +15 dBu output from the insert jack At INSERT jack: >0.0010% At MAIN OUT: >0.0015% (+21 dBu balanced output level) |
| Power Requirement | 120 VAC, 60Hz, 40 watts max. power consumption (U.S.A. model) |
| Dimensions (WxHxD) | 18.97 x 5.24 x 4.13" (482 x 133 x 105 mm) |
| Weight | 8 lbs (3.6 kg) |