
Hall Research UHBX-SC-WP HDMI+RS232+IR+PoH UTP (Dual Gang Wall Plate Sender)
The UHBX-SC-WP is an HDMI on Cat6 (HDBaseT™) double gang wall plate Transmitter. The package includes the following:
- UHBX-S-WP Decora® metal insert
- UHCOM-WP Decora® metal insert
- Standard white plastic Decora® face-plate
- Mud-ring for dry wall installation
The UHBX-SC-WP sender module is comprised of the UHBX-S-WP HDMI wall plate transmitter joined to the UHCOM-WP RS232 +IR add-on wall plate. When paired with a compatible receiver ( Hall Research model UHBX-R-PSE ), it can extend HDMI, bi-directional IR, full-duplex RS232, and PoH (power over HDBaseT™) over distances of up to 150 meters (500 feet) using a single Cat6 cable.
UHBX-SC-WP is fully compatible with the following HDBaseT™ receiver from Hall Research
Features
- Extends HDMI or DVI video to 500 ft on just one Cat6
- RS232 and IR extension in both directions with optional add-on
- Supports all HDMI or DVI resolutions including 4K (UHD)
- Wall plate does not need power connection (powered via UTP)
- Power-over-HDBaseT (PoH) meets IEEE 802.3af standard
- Sturdy and compact metal construction
- Fully compatible with HDBaseT™ standard
- Includes Mud-Ring for easy installation (no electrical box needed)
- RS232 supports baud rates to 115K
- IR extension meets all standards regardless of format or frequency
- Fully isolates ground between TX and RX sides
- Made in USA

Specifications
- Max Distance:
- Standard Mode (STD): 330 ft (100m)
- Long Reach Mode (LR) : 500 ft (150m)
- Video Standards: DVI (single link) and HDMI (compliant with HDMI 1.4 video specifications including 12 bit color depth, 3D video and 4K support)
- Signal Type: TMDS
- Connectors: Locking HDMI input, RJ45 HDBaseT output
- Video Resolutions:
- DVI signal VGA (640x480) thru WUXGA (1920x1200)
- HDTV signal 480i through 1080p
- Digital Cinema 4K (4096x2160)
- Supports 4K@60 Hz (4:2:0 8 bit color) or 4K@30 Hz (4:4:4 and 8 bit color)
- Audio Formats: All HDMI Embedded Audio including: LPCM 7.1CH, Dolby TrueHD and DTS-HD Master Audio (32-192kHz sample rate)
- DDC: Pass-Thru DDC for reading EDID directly from remotely connected LCD and HDCP handshake
- CEC: Pass-Thru CEC for Consumer Electronics Control compatible devices
- RS232: Bidirectional (full-duplex) any baud rate up to 115,200
- IR: Extended in both directions. Carrier modulation range from 30 KHz to 60 KHz
- PoH:
- Power-over-HDBaseT meets IEEE 802.3af standard.
- PD side identifies as Class 2 PoE device (3.84–6.49 watts).
- Actual power consumption of PD side is 5.5 watts max
- Power Supply:
- 100 VAC to 240 VAC, 50-60 Hz, external; 5 VDC, 3.2 A, regulated
- Actual DC current (powering both –PSE and –PD sides) 1.8A max
- Power: 3.0 watts (10 BTU) maximum
- Temp/humidity:
- Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, non-condensing
- Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, non-condensing
- Cooling: Convection
- Mounting: Metal
- Enclosure: Metal (Steel ends and Aluminum extrusion)
- Dimensions: 1.18" H x 4.13" W x 4.57" D (30mm H x 105mm W x 116mm D) Depth excludes connectors
- Product weight:
- Sender: 9.3 oz (0.58 lb or 264 g)
- Vibration: ISTA 1A in carton (International Safe Transit Association)
- Compliance: CE, FCC Class A
- MTBF: 90,000 hours (Calculated Estimate)
- Warranty: 2 years parts and labor