Martin RUSH Blinder 1 WW

The RUSH BLINDER 1 WW is an ultra-bright quad LED blinder fixture. The 2x2 blinder features a PAR array with four individually-controllable 100 watt COB warm white LEDs, providing high-intensity light for a variety of entertainment events. The unique frame on the RUSH BLINDER 1 WW offers the ability to attach multiple fixtures together in a grid pattern. With individually-controllable COBs, multiple units can be used to create pixel effects across a grid of fixtures, with on-board electronic dimming and strobe also available.

The fixture offers a wide 70° beam angle, with a combined 19,000+ lumens output from the fixture for truly brilliant effects. The rugged, lightweight construction and available brackets for floor or truss mounting make the RUSH BLINDER 1 WW ideal for live shows, TV events, stage, concerts, and nightclubs.

• Ultra-bright 2x2 100W LED blinder with individually-controllable LEDs
• Unique frame allows multiple fixtures to be mounted together
• Wide 70° beam angle for broad coverage

• 2x2 100W COB warm white LEDs
• 19,000+ lumens output
• Full pixel control of individual COBs
• Unique frame offers grid installation
• 70° beam angle
• Electronic dimming and strobe
• Brackets are available for floor or truss mounting
• Lightweight construction (5 kg / 20.9 lbs.)

• PHYSICAL
  • Length: 400 mm (15.7 in.)
  • Width: 441 mm (17.4 in.)
  • Height: 177 mm (7.0 in.)
  • Weight: 9.5 kg (20.9 lbs.)
• DYNAMIC EFFECTS
  • Dimming: 0 – 100%, coarse & fine control
  • Shutter: Strobe & pulse effects, instant open and blackout
• CONTROL AND PROGRAMMING
  • Control systems: USITT DMX512/1990 with RDM
  • DMX channels: 1, 4, or 8
  • RDM compliance: ANSI/ESTA E.120
  • Interface: Control panel with backlit LCD display
• OPTICS
  • Beam angle: 70°
• CONSTRUCTION
  • Housing: High impact flame retardant thermoplastic and aluminum
  • Color: Black
  • Protection rating: IP20
• INSTALLATION
  • Mounting points: Adjustable bracket, surface or truss mount
  • Location: Indoor location only
  • Orientation: Any
  • Minimum distance to combustible materials: 0.1 m (4 in.)
  • Minimum distance to illuminated surfaces: 0.5 m (20 in.)
• CONNECTIONS
  • AC power input/output: Neutrik PowerCon
  • DMX and RDM data in/out: 3-pin and 5-pin locking XLR
• ELECTRICAL
  • AC power: 100-240 V nominal, 50/60 Hz
  • Power supply unit: Auto-ranging electronic switch mode
  • Fuse: T 250 V 6.3 A
  • Typical half-cycle RMS inrush current: 15.5 A at 240 V, 50 Hz
  • Recommended Miniature Circuit Breaker when power linking: Type D*
  • *Per IEC 60898/UL489/CSA C22.2 No. 5
  • Maximum total power consumption: 448 W
• TYPICAL POWER AND CURRENT
  • 100 V, 60 Hz: 432 W, 4.3 A, PF 0.998
  • 120 V, 60 Hz: 428 W, 3.6 A, PF 0.996
  • 230 V, 50 Hz: 426 W, 1.9 A, PF 0.956
  • Measurements made at nominal voltage. Figures are typical, not maximum, allow for a deviation of +/- 10%.
• THERMAL
  • Cooling: Convection
  • Maximum ambient temperature (Ta max.): 40° C (104° F)
  • Minimum ambient temperature (Ta min.): 0° C (32° F)
• APPROVALS
  • EU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493
  • EU EMC: EN 55015, EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547
  • US safety: UL 1573
  • US EMC: 47 CFR 15 Class A
  • Canadian safety: CSA C22.2 No. 166
  • Canadian EMC: ICES-003 Class A
  • Australia/NZ: RCM
• INCLUDED ITEMS
  • Power cable, 1.5 m without mains plug