Skip Navigation Website Accessibility
 


Martin Exterior Projection 500 - Wide Lens

The Exterior™ Projection 500 is a powerful fixture for integrating textures, patterns and graphics in outdoor lighting designs. The fixture can be used for bright and dynamic logo projection as well as precision framing.

Using advanced LED technology, it offers outstanding energy efficiency, compact size and unlimited creative possibilities.

Creating custom gobos for building facades

  • Flat-field, high-contrast image projection 
  • Fully weatherized for trouble-free use with minimal maintenance in outdoor installations
  • Packed with features, allowing huge creativity in setting up exciting lighting effects

Features

  • Up to 6100 lumens output with 4 beam angles variants from narrow to wide
  • Powerful close-range and long-range projection
  • Flat-field, high-contrast image projection based on high-power LED engine
  • 4 layers of versatile dynamic effects (colors, gobo projection, gobo animation, prisms/frost)
  • Crisp image projection
  • Rugged IP66-rated housing
  • Minimal maintenance – low total cost of ownership
Specifications

Physical
  • Length: 415 mm (16.4 in.)
  • Width: 293 mm (11.6 in.)
  • Height: 444 mm (17.5 in.)
  • Weight: 17.5 kg (38.6 lbs.)
  • All figures include mounting yoke

Dynamic Effects
  • Color wheel: 8 interchangeable colors + open
  • Gobo wheel: 6 rotating gobos plus open, indexing, variable rotation
  • Gobo animation: Variable speed linear animation effect
  • Prism: Prism wheel with 2 interchangeable prisms, prism rotation and indexing
  • Frost (wash effect): Motorized variable
  • Focus: Motorized, variable 3 m (9.8 ft.) to infinity
  • Dimming: Electronic, constantly variable 0-100%, 16-bit control
  • Shutter: Strobe and pulse effects, instant open and blackout
  • Control and Programming
  • Control options: DMX, RDM, standalone
  • Control resolution: 8-bit DMX control of each color
  • Configuration, addressing and status: Onboard control panel with OLED display
  • DMX channels: 13
  • DMX compliance: USITT DMX512-A
  • RDM compliance: ANSI/ESTA E1.20


Optics
  • Light source: 230 W white light LED engine
  • CRI (Color Rendering Index): 72
  • Color temperature: 8300 K
  • LED lifetime: 20,000 hours (to >70% luminous output)*
  • LED manufacturer: Prolight Opto
  • *Figure obtained under manufacturer's test conditions

Photometric Data
  • Cut-off angle: 36°
  • Total output: 5700 lumens
  • Center peak: 28,000 cd

Construction
  • Housing: Cast aluminum
  • Finish: Hard anodized, metallic grey lacquered
  • Front glass: 5 mm (0.2 in.) anti-reflection coated tempered glass
  • Ingress protection: IP66
  • Impact resistance: IK08 (with control panel display cover plate installed)
  • Corrosion resistance: C5-M (very high corrosivity / marine, ISO 12944)
  • EPA (Effective Projected Area): 0.15 m2
  • RoHS compliant

Gobos
  • Suitable material: Borosilicate glass, coatings heat-resistant to 450°C (842° F)
  • Alternative material: Aluminum 1060, paint on front lens side, 450° C (842° F)
  • Gobo diameter: 30.0 mm +0/-0.3 mm (1.2 in. +0/-0.02 in.)
  • Maximum image diameter: 23 mm (0.91 in.)
  • Glass gobo thickness, minimum: 1.1 mm ±0.1 mm (0.045 ±0.004 in.)
  • Glass gobo thickness, maximum: 3.0 mm ±0.3 mm (0.12in. ± 0.012 in.)
  • Aluminum gobo thickness: 0.5 mm ± 0.02 mm (0.020 in. ± 001 in.)
  • HT paint

Installation
  • Mounting: Adjustable yoke
  • Location: Suitable for wet locations. Do not immerse in water.
  • Orientation: Any (sides must be kept vertical)
  • Minimum distance to illuminated surfaces: 0.5 m (20 in.)

Connections
  • Power cable entry: IP68 cable gland
  • Power connection: 1.8 m (5.9 ft.) cable tail with bare ends
  • Data cable entry: IP68 cable gland
  • Data connection: 1.8 m (5.9 ft.) combined input + output cable tail with bare ends

Electrical
  • AC power: 100-240/277 V nominal, 50/60 Hz
  • Power Supply: Auto-ranging electronic switch-mode
  • Typical half-cycle RMS inrush current: 8.4 A
  • Surge protection: 4 KV
  • Idle power (zero intensity, no effects applied): 32 W, 0.3 A
  • Typical Power and Current
  • 110 V, 60 Hz: 320 W, 2.9 A, PF 0.977
  • 230 V, 50 Hz: 310 W, 1.4 A, PF 0.971
  • 277 V, 60 Hz: 305 W, 1.2 A, PF 0.950
*Figures are typical, not maximum. Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.

Thermal
  • Cooling: Convection, internal forced air
  • Total heat dissipation (calculated): 1100 BTU/hr.
  • Maximum surface temperature: 85° C (185° F)
  • Maximum ambient temperature (Ta max.): 45° C (113° F) *
  • Minimum ambient temperature (Ta min.): -30° C (-22° F)**
  • *Above this temperature, the fixture regulates output to protect from overheating.
  • **For instant wake-up with no warm-up mode, leave power applied constantly in ambient temperatures below 0° C (32° F)

Approvals
  • EU safety: EN 60598-2-1, EN 60598-2-5 (EN 60598-1), EN 62471, EN 62493
  • EU EMC: EN 55015, EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61547
  • US safety: ANSI/UL 1598
  • US EMC: CFR 47 Part 15 Class A
  • Canadian safety: CSA C22.2 No 250.0
  • Australia/NZ: RCM

Accessories
  • Glare Shield, Exterior Projection 500, aluminum: P/N 91611767
  • Projection Setup Gobo: P/N 91616068
  • EP-500, Manual Framing Module: P/N 91611842