Skip Navigation Website Accessibility
 


Radial Cherry Picker 4-Channel Pramp Selector

Hear more options in less time

The Cherry Picker gives you the ability to connect to multiple devices in the studio and instantly A/B between them without any time-consuming cable swapping or re-patching. Now you can test your vocal mic through four different preamps without even stopping playback. It also works with line level signals, so you can connect the output of a single mic preamp into four compressors or effects units. The Cherry Picker helps you make quick decisions with the confidence that comes from an immediate A/B comparison. When paired with the Radial Gold Digger™ you can choose between four sources and destinations and select any combination instantly, giving you the freedom to explore endless sonic possibilities.

Cherry Picker Applications

Comparing preamps using one mic

Connect your favorite microphone and compare how it sounds using several preamps to find the best match to suit the vocalist. The Cherry Picker makes it easy and fast.

Comparing compressors when recording bass

Optimize the sound of the bass by comparing compressors. Connect the bass to the JDV-pre instrument preamp and use the Cherry Picker to listen to various compressors.

Using the Cherry Picker to switch outputs

The 'straight wire' balanced signal path may be used for more than just microphones! You can use the Cherry Picker as a 1x4 switcher for line level devices of all types.

Specifications 
Audio circuit type: Passive signal path with active relay switching
Frequency response: 10Hz to 40kHz
Dynamic range: >115dBu
Gain: 0.0dB – Unity gain device
Total harmonic distortion: 0.0003%
Intermodulation Distortion: 0.001%
Phase Deviation: < 0.001 degrees at all frequencies
Input Impedance: 10k Ohms
Common Mode Rejection Ratio: -97dB @55Hz
Equivalent Input Noise: -115dB
Maximum Input: +26dBu
Maximum Output: +26dBu
Features
Ground lift, Phantom Power
Input Connectors: Balanced XLR female
Output Connectors: 4 x XLR male
General
Construction: 14 gauge steel chassis & outer shell
Size (L x W x D): 4.5" x 2" x 6" (121 x 64 x 147mm)
Weight: 2.8 lb (1.3kg)
Shipping size (L x W x D): 4.75" x 2.5" x 10.75" (121 x 64 x 273mm)
Shipping weight: 3.05 lb ( 1.4kg)
Power: +15V DC/400mA power supply included
Conditions: For use in dry locations only between 5°C and 40°C
Warranty: Radial 3-year, transferable