The Datavideo ITCSL-HP1K Intercom Accessory Set is suitable for use with Datavideo Intercom Systems. It comes with the HP-1 Single-Ear Headset, ITC-100SL Beltpack, a 65.6’ XLR to XLR Intercom cable, and TD-LT tally light (no base station).
The Single-Ear HP-1 High-Quality Headset and ITC-100SL Beltpack are compatible with the Datavideo ITC-100 Intercom System.
The TD-LT Tally Light can be used with the TB-5 Tally Box.
Datavideo HP1 Single-Ear Headset for ITC Intercom Systems
The Datavideo HP1 Single-Ear Headset is compatible with Datavideo ITC Intercom Systems. It features a closed-back design to reduce outside noise, a soft circumaural earpad and a noise-cancelling microphone. The headphone speaker resists clipping during loud monitoring.
Datavideo ITC-100SL Additional Beltpack for ITC-100 Intercom System
The ITC-100SL Additional Beltpack from Datavideo is the same beltpack as the 4 that come included with the Datavideo ITC-100 intercom system. It can be used as a replacement or to expand the system. The ITC-100 intercom system supports up to 8 of these beltpacks in total.
The beltpack features a 5-pin XLR input for talkback, power, and tally, and 3.5mm and 2.5mm headphone jacks for standard or Motorola type headphones. It has call and talk buttons, volume control, and a bi-color tally light. You can use it over a 650 ft communication distance.
Datavideo TD-LT Tally Light
The Datavideo TD-LT Tally Light is a one piece tally light accessory for live switchers. This tally light works with a Datavideo live switcher system allowing the user and talent to recognize which camera is "hot" during a production. When the camera is selected on the switcher the light illuminates for usage indication.
Datavideo CB-3 - 65' (20m) Extension Cable for ITC-100
The CB-3 from DataVideo is a 65 foot (20m) extension cable for use with the ITC-100 intercom system. The straight cable terminates in 5-pin XLR connectors for connection between the base station and a beltpack.
Datavideo HP1 Single-Ear Headset For ITC Intercom Systems Specs
Earpiece Design | Over-Ear (Circumaural), Closed-Back |
Number of Earpieces | Single Earpiece |
Driver Type | Dynamic |
Impedance | 24 Ohms |
Frequency Response | 10 Hz to 22 kHz |
Maximum Power Handling | 100 mW |
Total Harmonic Distortion (THD) | 0.2% |
Type | Condenser |
Pickup Pattern | Omnidirectional |
Frequency Response | 20 Hz to 16 kHz |
Sensitivity | -64 dB |
Impedance | 2.2 Kilohms |
Audio Connector to Source | 1 x 1/8" / 3.5 mm |
Package Weight | 1.22 lb |
Box Dimensions (LxWxH) | 14.1 x 9.85 x 4.7" |
Datavideo ITC-100SL Additional Beltpack For ITC-100 Intercom System Specs
Input Connections | 1 x 5-pin XLR |
Mic / Headset | 1 x 3.5 mm stereo jack for combination headphone/microphone 1 x 2.5 mm stereo jack for combination headphone/microphone Headset Impedance: 8-600 Ohms, 100 mW (min) Microphone Level: -67 dB |
Frequency Response | 550-3.6 kHz, < +/-3 dB |
THD | < 3% |
S/N Ratio | 50 dB |
Tally Output | 3.5 mm jack for connecting to TD-2 or TD-3 Tally Indicator |
Tally LED Indicator | Bi-Color: Red: "Live" Green: "Cued" |
Power LED | Confirms power status |
Communication Distance | 650 ft (200 m) |
Operating Temperature | 41 to 111°F (5 to 45°C) |
Dimensions | 4.5 x 3.75 x 1.4" (114 x 95 x 35 mm) |
Weight | 12.3 oz (350 g) |
Package Weight | 4.135 lb |
Box Dimensions (LxWxH) | 7.5 x 7.15 x 7.05" |
Datavideo TD-LT Tally Light Specs
Box Dimensions (LxWxH) | 4.2 x 3.8 x 2" |
Datavideo CB-3 - 65' (20m) Extension Cable For ITC-100 Specs
Package Weight | 2.49 lb |
Box Dimensions (LxWxH) | 7.3 x 6.7 x 2.65" |