Ashly TM-360 3-Channel Public Address Mixer/Amplifier - 60W
The Ashly TM-360 is a table-top mixer and 60W mono amplifier suitable for applications that require background music with priority paging from a single microphone. There are two line level inputs and one mic/line input with switchable phantom power. Input 3 is a line input, input 2 is a line input with priority over input 3, and input 1 is a mic/line input with priority over input 2. Main speaker outputs include a 60 watt 4W connection as well as 25V and 70V outputs. 230V export versions have 60 watt 4W, 70V, and 100V outputs. A second zone output is available with a 1W 8W output as well as a balanced 600W output, and an independent 600W PRE output is available as well.
All input and speaker connections use Euroblock connectors, with inputs 2 and 3 also using summed mono dual RCA jacks. A rear panel DIP switch determines each input’s zone 2 assignment status, inputs 1 and 2 priority (mute trigger) status, inputs 2 and 3 mute link status, low cut filter, and phantom power status for input 1. The TM-360 has a power saving standby mode which can be triggered by audio inactivity or by contact closure.
Features- 3 Inputs
- Priority Mute
- Zone 2 Output for Selected inputs
- Bass & Treble Controls
- 60W Output @ 4 Ohms, 25V, 70V (100V)
- Power Saving Mode
- Optional Rack Kit
- 5 Year Warranty
- Rated Output Power (THD 1%): 60W (RMS)
- OutputVoltage/Impedance:
- USA/Canada & Associated: 4Ohms/15.5V 10.4Ohms/25V 82Ohms/70V
- EC & Associated, Japan: 4Ohms/15.5V 82Ohms/70V 167Ohms/100V
- Frequency Response(1W @ 1KHz):
- Input 1,2,3 +1/-3dB, 80Hz – 15KHz
- THD (60W @ 1KHz): < 1%
- S/N Ratio (60W @ 1KHz, A weighted): Input 1,2,3>80dB
- Input Sensitivity:
- Input 1 -10dBV to -50dBV
- Input 1,2 0dBV to -20dBV
- Tone Control:
- Treble (10KHz) +10dB
- Bass (100Hz) +10dB
- Residual Noise (Input 1-3 volume min, tone at center):
- Master volume minimum: -72dB
- Master volume maximum: -57dB
- Zone 2 Output:]
- Rated power 8Ohms (RMS, THD 3%)1W
- Balanced 600Ohms 2.4V
- PRE Out (input -10dBV): 0dBV
- Mix Configuration Switches:
- SW1 Zone 2 Assign Input 1
- SW2 Zone 2 Assign Input 2
- SW3 Zone 2 Assign Input 3
- SW4 VOX Trigger Input 1
- SW5 VOX Trigger Input 2
- SW6 Mute Link Input 2 & 3
- SW7 Low Cut, 400Hz 6dB/Oct.
- SW8 Ch1 Phantom Power, +18V
- Manual Mute Contact Closure: Pins 1 & G = Input 1Mute Trigger
- Master System Standby Contact Closure: Pins G & 2= Power Standby
- AC Requirements:
- 120VAC, 60Hz, 24W (USA & Canada and Associated)
- 230VAC, 50/60Hz, 24W (EC and Associated)
- Line Current Draw @ 120VAC 60Hz (for 230VAC models, divide line currentdraw values by 2):
- Standby: 0.15A
- Idle: 0.24A
- 1/8th Power Pink Noise: 0.38A
- 1/3rd Power Sine Wave: 0.66A
- Thermal Dissipation (BTU/hr):
- Standby: 26
- Idle: 43
- 1/8th Power Pink Noise: 53
- 1/3rd Power Sine Wave: 75
- Environmental: 40°F ~ 120°F (4° ~ 49°C)non-condensing
- Weight: 8.6lb (3.9kg)
- Dimensions (WxHxD): 11.4” x 3” x 7.3” (290mm x 76mm x 185mm)