Skip Navigation Website Accessibility
 


Shure MX405LP/MS 5" Shock-Mounted Gooseneck, Mini Shotgun, with Bottom LED Ring, No Preamplifier

The MX405 is a gooseneck microphone with a Bi-Color LED or red light ring status display. It has a 12.7 cm / 5 inch gooseneck and is suitable for boardrooms and other sites where aesthetics are important.

Features:

  • Gooseneck length: 5 inch / 12.7 cm)
  • Low profile, aesthetic design
  • Wide dynamic range and smooth frequency response
  • RF filtering with CommShield™ technology
  • Status indicator: Bi-Color LED at gooseneck bottom or red light ring on gooseneck top
  • Capsule options: None, Cardioid, Supercardioid

Flexible in more ways than one, Microflex Miniature Gooseneck microphones deliver unsurpassed style and performance for conference rooms and similar applications. Offering desktop or mounted bases, wired or wireless options, and even interchangeable cartridges, it’s easy to get the perfect fit for your conferencing installation. Fully compatible with SLX® wireless systems, including the SLX4L wireless receiver with logic output for applications requiring logic functionality.

Specifications

Type Condenser (electret bias)
Frequency Response 50-17000 Hz
Polar Pattern (at 1 kHz)
MX405/C, MX410/C Cardioid
MX405/S, MX410/S Supercardioid
Output Impedance EIA Rated at 150 ? (170 ? actual)
Output Configuration Active Balanced
Sensitivity (at 1 kHz , open circuit voltage) 1 Pascal=94 dB SPL
Cardioid -35 dBV/Pa (18 mV)
Supercardioid -34 dBV/Pa (21 mV)
Maximum SPL (1 kHz at 1% THD, 1 k? load)
Cardioid 121 dB
Supercardioid 120 dB
Equivalent Output Noise (A-weighted)
Cardioid 28 dB SPL
Supercardioid 27 dB SPL
Signal-to-Noise Ratio (referenced at 94 dB SPL at 1 kHz)
Cardioid 66 dB
Supercardioid 68 dB
Dynamic Range (1 k? load at 1 kHz) 93 dB
Common Mode Rejection 45 dB minimum
Preamplifier Output Clipping Level -8 dBV (0.4 V)
Polarity
3-Pin XLR Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector.
5-Pin XLR Positive sound pressure on diaphragm produces positive voltage on pin 4 relative to pin 2 of output XLR connector.
Weight
MX405 0.054 kg (0.119 lbs)
MX410 0.068 kg (0.150 lbs)
MX400DP 0.516 kg (1.138 lbs)
MX400SMP (w/ Kit) 0.125 kg (0.275 lbs)
Logic Connections
LED IN Active low (?1.0V), TTL compatible.
Absolute maximum voltage -0.7V to 50V
LED OUT Active low (?1.0V), sinks up to 20mA, TTL compatible.
Absolute maximum voltage -0.7V to 50V (up to 50V through 3k?)
Cable  
MX400DP 6.1 m (20 ft) attached cable with shielded audio pair terminated at a 3-pin male XLR and three unterminated conductors for logic control
Environmental Conditions
Operating Temperature -18-57 °C (0-135 °F)
Storage Temperature -29-74 °C (-20-165 °F)
Relative Humidity 0-95%
Power Requirements 48-52 Vdc phantom, 8.0 mA