Skip Navigation Website Accessibility
 


Shure MX410RLP/C 10" Shock-Mounted Cardioid Gooseneck Microphone with LED Ring

The MX410 surface mount version is a gooseneck microphone with a Bi-Color LED as status display. It has a 10" gooseneck and is suitable for boardrooms and other sites where aesthetics are important.

Features:

  • Gooseneck length: 10 inch / 25.4 cm)
  • Low profile, aesthetic design
  • Wide dynamic range and smooth frequency response
  • RF filtering with CommShield™ technology
  • Status indicator: Bi-Color LED at gooseneck bottom or red light ring on gooseneck top
  • Capsule options: None, Cardioid, Supercardioid

Specifications
Type Condenser (electret bias)
Frequency Response 50-17000 Hz
Polar Pattern (at 1 kHz)
MX405/C, MX410/C Cardioid
MX405/S, MX410/S Supercardioid
Output Impedance EIA Rated at 150 ? (170 ? actual)
Output Configuration Active Balanced
Sensitivity (at 1 kHz , open circuit voltage) 1 Pascal=94 dB SPL
Cardioid -35 dBV/Pa (18 mV)
Supercardioid -34 dBV/Pa (21 mV)
Maximum SPL (1 kHz at 1% THD, 1 k? load)
Cardioid 121 dB
Supercardioid 120 dB
Equivalent Output Noise (A-weighted)
Cardioid 28 dB SPL
Supercardioid 27 dB SPL
Signal-to-Noise Ratio (referenced at 94 dB SPL at 1 kHz)
Cardioid 66 dB
Supercardioid 68 dB
Dynamic Range (1 k? load at 1 kHz) 93 dB
Common Mode Rejection 45 dB minimum
Preamplifier Output Clipping Level -8 dBV (0.4 V)
Polarity
3-Pin XLR Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector.
5-Pin XLR Positive sound pressure on diaphragm produces positive voltage on pin 4 relative to pin 2 of output XLR connector.
Weight
MX405 0.054 kg (0.119 lbs)
MX410 0.068 kg (0.150 lbs)
MX400DP 0.516 kg (1.138 lbs)
MX400SMP (w/ Kit) 0.125 kg (0.275 lbs)
Logic Connections
LED IN Active low (?1.0V), TTL compatible.
Absolute maximum voltage -0.7V to 50V
LED OUT Active low (?1.0V), sinks up to 20mA, TTL compatible.
Absolute maximum voltage -0.7V to 50V (up to 50V through 3k?)
Cable  
MX400DP 6.1 m (20 ft) attached cable with shielded audio pair terminated at a 3-pin male XLR and three unterminated conductors for logic control
Environmental Conditions
Operating Temperature -18-57 °C (0-135 °F)
Storage Temperature -29-74 °C (-20-165 °F)
Relative Humidity 0-95%
Power Requirements 48-52 Vdc phantom, 8.0 mA