
Rane Commercial Zonetech Multi Zone Commercial Processor
The Zonetech features six inputs and six outputs for multi-zone audio distribution and control. Powered by exclusive Rane Halogen Lite software, it requires no programming, so operation is quick and intuitive. An additional wireless input for Bluetooth® 4.1 AD2P is provided to receive streaming audio from a smartphone or tablet. A contact closure for emergency “Mute All” is provided for integration with alarm systems. All zones have balanced outputs and the 6th zone can work in Stereo or Crossover Mode, easily selectable from the front-panel display. Independent source selection and volume control for each zone is done with Rane’s elegant DRZH wall-control, which comes in an elegant glassy finish to suit all decors. A master remote port accommodates the Rane DR6 7” colored touchscreen for overall control and both wired and Wi-Fi ethernet ports enable the Zonetech to be accessed and controlled via a web browser. DRZH Remote Level Control with Source Selector The DRZH is a wall-mounted digital remote (DR) for use with all Rane multiprocessors, including the new Zonetech audio processor. The DRZH features source selection and level control through the use of a single knob. It has a sleek black glass design, and the OLED display is easy to read in any environment. Connect the DRZH to RANE DSP with a Cat5e (or better) cable for a local run up to 1000 ft (300m) away from the equipment rack. Each DRZH may be installed onto a standard U.S. 1-gang electrical box. Zone Pager Tabletop Paging Station The RANE Zone Pager is a paging station that allows users to page up to (6) zones separately, to (2) groups of zones, and to all zones at the same time. Lights will indicate if the zone is READY or BUSY (already being paged by a higher-priority paging station) and when the chime has completed (if enabled). Zone Pager is perfect for use in bar/lounge restaurants, meeting rooms, schools, house of worship, and smaller venues where multiple paging zones are needed. DR6 Digital Touchscreen Remote The DR6 is a touchscreen remote for the HAL family. It supports multiple pages or tabs, and any set of levels, toggles, selectors and/or commands. Drag, drop, and resize controls as desired.Compatible Products
Features
Package Contents
Technical Specifications
Audio Inputs
Connectors
(1) 6-pin 3.8mm Euroblock input (balanced mic/line level, green)
(4) RCA stereo output pairs
Maximum Input Level
+20dBu
Audio Outputs
Connectors
(3) 6-pin 3.8mm Euroblock outputs (Zones 1-4 & 6, balanced line level, orange)
(1) 3-pin 3.8mm Euroblock output (Zone 5, balanced line level, orange)
Impedance
200Ω, each leg to ground
Maximum Output Level
+20dBu
Frequency Repsonse
40Hz–16Hz (+0/-3 dB)
Dynamic Range
111dB(A-weighted)
THD+N
0.005% (+4dBu output, 1kHz)
Bluetooth Specifications
Version
4.1
Profile
A2DP
Range
Up to 100 feet/30.5 meters
Maximum transmission Power
Class-1, 10dBm (10mW)
Frequency
2.4-2.480GHz
Display
Type
RGB TFT
Dimensions
3.9" x 1.2"/99mm x 30mm (width x depth)
4.1"/104mm (diagonal)
Resolution
480 x 128
Other Connectors
(6) RJ45 ports (Zone 1-6 remote control via DRZH)
(1) RJ45 port (master remote control)
(1) RJ45 port (pager)
(1) Ethernet port (computer)
(1) 2-pin 3.8mm Euroblock input (TTL[digital logic], black)
(1) BNC antenna input (Bluetooth)
(1) IEC power cable input
Operating Temperature
32-113°F/0-45°C (non-condensing)
Power
Connection
IEC
Voltage
100–240VAC, 50/60Hz
Consumption
50W
Dimensions
(width x depth x height)19"w x 8.7"d x 1.7"h
(482mm x 220mm x 44mm)
Weight
6.4 lb.
2.75 kg