Skip Navigation Website Accessibility
 


Radial DiNET Dan-TX 2 Channel Dante Network Transmitter

  • Stereo analog input device for Dante networks
  • Connect instruments or line level sources
  • ¼”, RCA and 3.5mm stereo TRS inputs
  • 24bit/96kHz analog to digital conversion

More ways than ever to connect over Dante

Need to connect a smartphone, tablet, or any playback device to a Dante network? How about an electric guitar, while still feeding an amp on stage? The DAN-TX can do it all. In fact, with signal handling of up to +24dB, you can connect the line level outputs of a mixing console to the DAN-TX without breaking a sweat. A local level control allows you to adjust as needed, and a number of input connector types ensures you won’t be digging around for an adaptor cable at a critical moment. No matter what source you’re using, the DAN-TX is the easiest way to get your analog audio onto a Dante network.

DiNET DAN-TX Applications

Using the DAN-TX for mono instruments

Switching to instrument mode changes the Right ¼" connector to a Thru-put for connection to a local amplifier. Now your instrument can be routed anywhere on Dante network while still allowing for local monitoring through the stage amplifier.

Using the DAN-TX for stereo instruments or multi-media

Plug in your stereo keyboards, synths, laptops, tablets or any other unbalanced consumer device and route through the Dante network without installing special software. Simply connect to the ¼", RCA or 3.5mm inputs.

Using the DAN-TX for balanced professional audio

The DAN-TX features ¼” TRS jacks that allow for signal levels up to +24dBu. Any balanced analog mixer, recorder or playback source can be quickly connected to a Dante network.

Using the DAN-TX to easily connect mobile devices

The 3.5mm input on the DAN-TX makes it easy to connect smartphones, tablets, and other mobile devices and connect them to your Dante network without worrying about installing software or finding adapter cables.

The DiNET DAN-TX is a robust solution for interfacing analog audio gear with a digital Dante-enabled network. Inputs are provided for ¼”, RCA, and 3.5mm connections; so instruments, mobile phones, tables, and professional audio gear can be seamlessly integrated. The DAN-TX handles signal levels up to +24dB, so even the hottest outputs can be used without overloading the device. Side switches allow you to configure the DAN-TX for use with either instruments or line level devices, engage a -20dB pad, or utilize a high-pass filter when needed. 24bit / 96kHz converters ensure the best possible audio quality, and 14-gauge steel construction ensures the DAN-TX will stand up to the toughest touring conditions.

Specifications 
Audio circuit type: High current balanced active input device
Number of channels: 2
Frequency response: 20Hz - 20kHz
Dynamic range: >103dB
Total harmonic distortion: 0.008% @ -6dBfs
Intermodulation Distortion: 0.0017% -10dBfs
Input Impedance: Unbal 240kΩ (20kΩ Line Mode), Bal 40kΩ,
Noise: -98dB (EIN)
Noise: 44.1kHz, 48kHz, 88.2kHz, and 96kHz (24bit)
Features
Input pad, HPF, Level Control
Input Connectors: 1/4" TRS, 3.5mm & RCA
Output Connectors: RJ45 Ethernet
Extras: Instrument or Line Mode
General
Construction: 14-gauge steel
Size (L x W x D): 5" x 3.31" x 1.88" (12.7cm x 8.4cm x 4.8cm)
Weight: 1.45lb (0.66kg)
Shipping size (L x W x D): 11.75" x 4.75" x 3" (29.8cm x 12.1cm x 7.6cm)
Shipping weight: 2.1lb (0.95kg)
Power: 15VDC 400mA (included) or PoE
Conditions: For use in dry locations only between 5°C and 40°C
Warranty: Radial 3-year, transferable