JBL ASB6112-WH 12" Passive Subwoofer - White
Part of JBL’s AE Application Engineered Series, the ASB6112 is a high power, lightweight front-loaded vented subwoofer. It's equipped with JBL's 2263H Differential Drive® dual coil dual gap 12" woofer, which features a neodymium magnet and ultra robust cone for extra long life.
Features- 2263H 12" Differential Drive dual voice coil dual gap, neodymium magnet transducer
- 1000W continuous pink noise, 4000W peak power handling capacity
- Large vent area for high output with low distortion
- For ground-stacked or suspended applications in stand-alone arrays or in combination with other AE Series products
- Frequency Range (-10 dB): 35 Hz – 1 kHz
- Frequency Response (±3 dB): 43 Hz – 1 kHz
- Transducer Power Rating: 1000W (4000W peak), 2 hrs
- Long-Term System Power Rating: 700W (2800W peak), 100 hrs
- Maximum SPL (1 m): 40 Hz - 300 Hz, 126 dB-SPL cont avg (132 dB peak)
- System Sensitivity: 40 Hz - 300 Hz, 96 dB SPL, 1W (2.83 V) @ 1 m
- Nominal Impedance: 8 Ω
- Low Frequency Driver: (1) JBL 2263H 305 mm (12") diameter, 75 mm (3") Dual Coil Dual Gap neodymium Differential Drive driver
- Enclosure: Rectangular cabinet, 16 mm (5/8") exterior grade 11-ply birch plywood
- Suspension Attachment: 16 points (4 top, 4 bottom, 4 each side), M10 threaded hardware
- Finish: Black or white DuraFlex™
- Grille: Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing
- Input Connector: NL4 Neutrik speakON® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (0.375") spade lugs. speakON in parallel with barrier strip for loop-through
- Environmental Specifications: Mil-Std 810; IP-x3 per IEC529
- Dimensions (H x W x D): 16" x 14.5" x 19" (406 x 369 x 483 mm)
- Net Weight: 36 lbs. (16.3 kg)
- Optional Accessories: M10 x 35 mm forged shoulder eyebolts with washers