The XPRS2 Series couples the versatility and mobility of the original XPRS Series with elevated sound-performance and audio intelligibility to deliver a high-caliber speaker system for mobile DJs, live sound, houses of worship, rental and fixed installations.
Powerful Class D Amplification
The XPRS2 Series employs Class D Amplification with high output wattage for a powerful and premiere audio experience for performers and listeners alike. The XPRS102 and XPRS122 full-range speakers feature Class D 2000 W amplification, while the XPRS1152S and XPRS1182S subwoofers offer Class D 4000 W amplification.
High Quality, Robust Build
Pioneer DJ’s all-new XPRS2 Series features a sleek all-black, protective pollywood cabinet for performance in harsh outdoor and indoor environments. The series models all come with a durable handle to support system portability and handling during setup and take down. The XPRS2 Series also features rubber feet to create separation and shock absorption between surfaces.
Three DSP Modes
Both of the XPRS2 subwoofers contain three different DSP preset modes—Boost, Extended LF, and Normal—to suit different listening environments.
Accurate Audio Performance / Frequency Response
The XPRS1152S employs a 15” ferrite woofer with a 3” voice coil with long excursion to produce low frequencies with paramount accuracy.
Providing a frequency response of 45 Hz – 120 Hz and a maximum SPL of 129 dB; the subwoofers pack in the performance of a permanent install subwoofer with the compact mobility required by today’s mobile artists, performers and venues.
Specifications
Type
|
15 inch active subwoofer |
|---|
Amplifier Output
|
|
|---|
What's in the box
|
- XPRS1152S x 1 (not sold as a pair)
- Powerd cord
- Quick start guide
- Important Safety Precautions
|
|---|
Supported voltages
|
110 V to 240 V (50 Hz/60 Hz) |
|---|
Power consumption
|
800 W |
|---|
Frequency Range
|
45 – 120 Hz |
|---|
Width
|
22.83 in |
|---|
Height
|
17.72 in |
|---|
Depth
|
19.8 in |
|---|
Weight
|
57.98 lb |
|---|
DSP modes
|
- EQ Mode Select (3 DSP Preset Modes(Switch))
- LPF
- POLARITY
|
|---|
DSP presets modes
|
|
|---|
Maximum Sound Pressure
|
129 dB |
|---|
Inputs
|
- Left Mono (Combo)
- Right (Combo)
|
|---|
Outputs
|
- Left Mono (XLR)
- Right (XLR)
|
|---|
Driver
|
15 inch ferrite LF cone driver |
|---|
Finish
|
Black paint, Rubber feet |
|---|
Handle
|
2 (on both sides) |
|---|
Pole socket
|
35 mm socket |
|---|
Enclosure
|
Plywood (TSCA) |
|---|
Amplifier Protection
|
- Thermal limiting
- Digital compressor
|
|---|
Driver Protection
|
Short circuit protection |
|---|
Power unit Protection
|
- Primary AC mains overcurrent protection
- Primary AC mains overvoltage protection
|
|---|
* The specifications and design of this product are subject to change without notice.
