
Antari W-508 Fog Machine - 800W, Wireless Remote
Antari W-508 Fog Machine
The cutting-edge wireless control system gives Antari W series a simple setting and operation interface. Additionally, the state-of-the-art heater design upgrades the W Series fog machines to a higher level in terms of good quality fog and energy efficiency. In conclusion, Antari W Series bring users to a professional scene in an easier method.
Features:
Intelligent Wireless Control SystemEach machine comes with a set of wireless receiver and transmitter as a standard controller. The working distance of wireless
control is 50 meters in open area.
Opto-electronic Fluid Sensor
When the fluid recipient runs dry, the fluid sensor stops pumping automatically to protect the pump from burning.
More Efficient New Heat Exchanger Design
It can generate drier fog with smaller particles. This leads to a fairly low fog fluid consumption. Compare to the equivalent power
consumption heat exchangers, the same quantity of fog fluid in W series can produce 20% more fog than others.
New Advanced PCB (Printed Circuit Board)
Design The new system can control temperature precisely and rule out the influence from outside environments as much as
possible to make W series fog machines be able to work stably between – 20 and + 60 degree Celsius.
- Input voltage - Rated power - Warm-up time - Fluid consumption - Fluid tank capacity - Compatible fluid - Operating time - Ambient temp. range - Output - Control - Dimension - Weight |
US model : AC 100-120V, 50 / 60Hz 6.7A EU model : AC 220-240V, 50 / 60Hz 3.5A 800W 2 minutes (approx.) 13 ml/min 0.8 Liter (0.21 gallon) Antari FLG Heavy Fog Fluid Antari FLR Light Fog Fluid 60 mins at max. output 0 °C - 40 °C (32 °F-104 °F) 3,000 ft³/min (85 m³/min) Manual, Wireless L315 W128 H218 mm (L12.40 W5.04 H8.58 inch) 3.8 kg (8.38 lbs) |
