DataVideo PTR-10MKII - Robotic Pan and Tilt Head
|
|
|
Call for Availability
Datavideo’s brand-new PTR-10 Mark II is a robotic pan-tilt head that is designed to turn any small size video camera or block cameras into a robotic
A sleek design fits seamlessly in your studio. With its weight of 3.4 Kg, it can be placed on any heavy-duty tripod or mounted on the wall and ceiling which brings up a lot of flexibility for your video production.
The PTR-10 Mark II can be controlled by the included IR controller, VISCA protocol controller, Datavideo RMC-180 Camera controller, RMC-300A Universal Remote-Control Panel, and compatible with DVIP over Ethernet and other integration solutions such as Crestron.
Cost-Effective
PTR-10 Mark II makes the change from regular camcorder cameras to remote controlled PTZ very cost effective. Multi-camera remote operations can be handled by a single person.
Wide Range of Compatible Cameras Supported
The PTR-10 Mark II implements LanC control that is compatible with a wide range of professional video camcorders, allowing you to select the best camcorders for your needs.
Light Weight, Strong, and Sturdy design
With a weight of 3.4 kg, PTR-10 Mark II is built from aluminum alloy, making it a very sturdy base for your camera. It can support cameras up to 4 kilograms.
Diversified Controller Options
Compatible with Serial, Ethernet, and Lanc. Datavideo RMC-180 series, RMC-300A, and HS-1600T series (T model only) will fit your need.
Built-in Tally light
With the big tally light in the front to show the status of your camera.
D-tap connector for DC output
The D-tap connector is widely used in the broadcast industry as a standard for powering accessories from battery or mains power. This will make it easier for you to find a ready-made power cable for your specific camera. Included is a D-tap to DC 5.5mm with lock for Datavideo cameras.
Selectable DC voltage output for different cameras (7.4 / 8.4 / 10 / 12V )
Multiple Signal Interface
PTR-10 Mark II supports a lot of signal interface for passing through the remote head. Amongst these interfaces are SDI, HDMI, RS-232, RS-422, DVIP, Tally, and LANC.
Optional Accessories: ZEK-1 Zoom Encoder Kit
ZEK-1 is the solution to your free running Zoom cameras.
PTR-10 Mark II can read its own Pan/Tilt movement and send back to controller for position memory and recall. Now, with ZEK-1, it can detect and read out the Zoom changes. And convert those information into Zoom position to send back for controller to memory and recall the saved zoom position. Compatible with cameras via zoom moving ring.
Specifications
| PTR-10 Mark II Robotic Pan Tilt Head | |
|---|---|
| Video Interface |
HDMI x 1 |
| Video Output |
2160p 29.97/25 |
| Control Unit |
RMC-180 |
| Panning / Tilting Range |
Pan: 340° |
| Panning / Tilting Speed |
Pan: 0.2~15° /Sec |
| Preset |
Pan/Tilt position 50 |
| Control Distance |
Sony VISCA |
| Control Protocal |
Sony VISCA |
| Control Input |
RS-422 |
| Maximum Load |
4 KG Max |
| Control Output |
RS-232 |
| Power Requirement |
DC 12V~ 18V, 3A (Without Camera) |
| Power Supply |
DC 12/10/8.4/7.4V, 24W Max |
| Operating Temp. Range |
0~40 C° |
| Operating Humidity Range |
10~80% |
| Storage Temp. Range |
-10~60C° |
| Storage Humidity Range |
5~80% |
| Weight |
3.4 kg |
| Dimension (LxWxH) |
230 x 190 x 300 mm |
| What's in the Box |
PTR-10 Mark II Main Unit x 1 |