Hall Technologies HBX-R HDMI Extender With Ultra-HD AV, IR, RS232 and Ethernet (RECIEVER ONLY)
This product is a Class A HDBaseT compliant Receiver that supports 100meter Cat6 range and is used to extend HDMI, RS-232, IR, and Ethernet (100BaseT) up to 100 meters (328 feet) using a single Cat6 cable.
Since the product uses the HDBaseT standard, video is extended pixel-by-pixel with no compression or latency. The extender supports all PC and HDTV Resolutions including 4K @ 30 Hz 4:4:4 or 4K @ 60 Hz 4:2:0. The IR extension preserves the modulation (carrier) frequency thereby providing compatibility to most standards.
Receiver includes a universal 5v power supply. IR emitter and IR detector cables are included.
Note about Power Supply
When connected to HBX-S, the Receiver needs the power supply connected as shown above. However, certain Senders, such as the HSM-44-BX Matrix Switch provide Power-over-Cable on their HDBaseT outputs eliminating the need for connecting a power supply to the Receiver.
Features
- Fully Compliant with HDBaseT standard
- Supports virtually all HDMI and DVI resolutions including 4K UHD
- Extends, Video, Audio, RS-232, IR, and Ethernet
- Supports extension to 100 m (330 ft)
- Fully isolates grounds between TX and RX sides
- Compact, Rugged, Reliable, and Economical
- Plug and play, no configuration needed
- Receiver can be powered via PoC from senders that provide PoC such as HSM-44-BX Matrix Switch with HDBaseT outputs
Specifications
| Video Standards | DVI (single link) and HDMI (compliant with HDMI 1.4 video specifications including 12 bit color depth, 3D video and 4K support) |
| Signal Type | TMDS |
| Resolutions | DVI signal - VGA (640x480) thru WUXGA (1920x1200) HDTV signal - 480i through 1080p Digital Cinema - 4K30 4:4:4 or 4K60 4:2:0 (4096x2160) up to 60 m |
| Audio Formats | All HDMI Embedded Audio including: LPCM 7.1CH, Dolby TrueHD and DTS-HD Master Audio (32-192 kHz sample rate) |
| DDC | Pass-Thru DDC for reading EDID directly from remotely connected LCD and HDCP handshake |
| CEC | Pass-Thru CEC for Consumer Electronics Control compatible devices |
| RS232 | Bidirectional (full-duplex) any baud rate up to 115,200 |
| Ethernet | 100BaseT Ethernet LAN |
| IR | Extended in both directions. Carrier modulation range from 30 kHz to 60 kHz |
| Power Supply | 100 VAC to 240 VAC, 50-60 Hz, external; 5 VDC, 2 A, regulated |
| Power | Sender & Receiver: 10 watts maximum |
| Temp/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, non-condensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, non-condensing |
| Cooling | Convection |
| Mounting | End plates with hole for surface mounting |
| Enclosure type | Metal (Aluminum ends, Aluminum Extrusion) |
| Dimensions | 1.0" H x 3.9" W x 3.9" D (25mm H x 100mm W x 100mm D) Depth excludes connectors |
| Product weight | Sender 9.3 oz (0.58 lb or 264 g) Receiver 10 oz (0.63 lb or 284 g) Kit (shipping) 37 oz (2.3 lb or 1050 g) includes: sender, receiver, universal power supply, manual, and packaging |
| Safety | CE |
| EMI/EMC | CE, FCC Class A |
| MTBF | 90,000 hours (Calculated Estimate) |
| Warranty | 3 years parts and labor |
Downloads
| Manuals | Versions | Last Updated | |
|---|---|---|---|
 |
HBX-S/HBX-R Manual | JUNE 24, 2020 | |