Skip Navigation Website Accessibility
 


JBL VRX918SP 18" Flyable Powered Subwoofer - Black

18 in. High Power Powered Flying Subwoofer
The VRX918SP is a powered, suspendable subwoofer system containing a 2268FF neodymium magnet, patented Differential Drive®, 18" woofer in a front-loaded, vented enclosure. The VRX918SP was designed specifically for use in arrays with the VRX932LAP Line Array speaker and VRX-AF Array Frame. In addition it may also be used in arrays consisting entirely of VRX918SP subwoofers.

Features
  • Built-in JBL Drivepack® DPC-2 amplifier module designed by Crown provides 1500 Watts of peak Power. DSP based resident input module provides system optimization, EQ and crossover functionality.
  • 18 inch, 2268FF dual voice coil, neodymium magnet Differential Drive® woofer for high-power capacity and
    light weight.
  • Integral rigging hardware for simple connection of enclosures and optional array frame.
  • 20 mm threaded pole socket for solid, secure satellite speaker mounting.
  • Large port area for reduced distortion.
Specifications
  • Power Rating: 1500 Watts Peak
    • LF: Dual-Bridged Technology™, Class D
  • Frequency: Range 31 Hz – 220 Hz
  • Dimensions: (H x W x D) 508 mm x 597 mm x 749 mm (20.0 in x 23.5 in x 29.5 in)
  • Frequency Response: 34 Hz – 220 Hz
  • Maximum Peak Output: 126 dB SPL at 1m
  • Bandpass Nominal Impedance - LF: 2 x 2 ohms
  • LF Driver: 1 x JBL 2268FF 457 mm (18 in) dual voice coil
    • Differential Drive® woofer with neodymium-magnet
  • Audio Input Connector: XLR with loop through
  • User Controls:
    • Input Attenuator (0-16 dB)
    • Selectable 80 Hz or 120 Hz Low Pass
    • 80 Hz High-Pass enable/disable for XLR loop thru.
  • Signal Processing: DSP based, resident in Input Module
  • System Management: DSP based limiters for mechanical and thermal protection
  • AC Power Operating Range: 90-132 VAC or 216-264 VAC, 50/60Hz
  • AC Line Voltage - User selectable: 120V/240V (-15%, +10%)
  • AC Input Connector: Neutrik PowerCon (NAC 3MPA)
  • AC Loop Through Connector: Neutrik PowerCon (NAC 3MPB)
  • AC Current Requirements: 6A per system at 120V, 3A per system at 240V
  • Enclosure: 18 mm birch plywood.
  • Suspension / Mounting: Optional VRX-AF line-array frame kit or 10 mm forged eyebolts
  • Finish: Black DuraFlex™ finish
  • Grille: Powder coated, black, 16-gauge perforated steel with
  • acoustically transparent foam
  • Net Weight: 38.5 kg (85 lb)
  • Optional Accessories:
    • VRX-AF array frame
    • SRX718S-CVR: Pull-over padded cover (works with WK-4S)
    • SS4-BK adjustable satellite speaker pole WK-4S Caster kit